Designs:
Straight pattern
Flanges, Butt weld ends, Socket weld ends, Screwed sockets, Union with butt weld ends

Materials:
GG-25 (0.6025)
C22.8 (1.0460)
15Mo3 (1.5415)
13CrMo44 (1.7335)
10CrMo910 (1.7380)
X10CrMoVNb91 (1.4903)
XCrNiTi1810 (1.4541)
ASTM A105
ASTM A182 F1
ASTM A182 F12
ASTM A182 F22

Nominal diameter:
DN 15 - 50

Nominal pressure:
PN 16, 40, 63, 100, 160, 250, 630
Class 150, 300, 400, 600, 900, 1500, 2500

Medium:
Steam, condensate

Temperature:
In dependence on material and pressure (see product catalogue)

Advantages:

• For discharge of small subcooled up to high subcooled condensate
• Automatic air venting during start-up and operation of the plant
• Installation in every position
• Integral strainer screen
• Design without gaskets due to sealing effect of metal contours (PN40, DN15-25)
• Simultaneous operation as check valve
• Replacement of the control unit without removing body from the line
• Variable adjustment of the subcooling temperature
• Especially insensitive to water-hammer and frost

Designs:
Straight and angle pattern
Flanges, Butt weld ends, Socket weld ends, Screwed sockets

Materials:
GGG-25 (0.6025)
GGG-40.3 (0.7043)
GS-C25N (1.0619)/C22.8 (1.0460)
15Mo3 (1.5415)/GS-17CrMo55 (1.7357)
13CrMo44 (2.7335)/GS-17CrMo55 (1.7357)
X6CrNiTi1810 (1.4541)/G-X6CrNi189 (1.4308)
ASTM A105/ASTM A216 WCB
ASTM A182 F1
ASTM A182 F12

Nominal diameter:
DN 15 - 50 (100)

Nominal pressure:
PN 16, 40, 63, 100, 160
Class 300, 400, 600, 900

Medium:
Steam, condensate, gases with liquid components

Temperature:
In dependence on material, pressure and flow medium (see product catalogue)

Advantages:

• Immediate discharge of hot boiling condensate even at significant variation in pressure and condensate load
• Controller with integral automatic air venting facility
• Integral non-return protection
• Optional with connection for pressure compensation line for air return and bypass line
• Robust, water-hammer resistant float ball
• Integral large surface strainer screen

Designs:
Straight pattern
Flanges, Butt weld ends, Socket weld ends, Screwed sockets, Union with butt weld ends

Materials:
GG-25 (0.6025)
GTS 35-10 (0.8135)
C22.8 (1.0460)
X8CrNiS 189 (1.4305)
X5CrNi 1810 (1.4301)
ASTM A105
X6CrNiTi1820 (1.4541)

Nominal diameter:
DN 15 - 50

Nominal pressure:
PN 6, 16, 40
Class 150, 300

Medium:
Steam, condensate

Temperature:
In dependence on material and pressure (see product catalogue)

Advantages:

• For discharge of small subcooled up to high subcooled condensate
• Automatic air venting during start-up and operation of the plant
• Installation in every position
• Integral strainer screen
• Design without gaskets due to sealing effect of metal contours (PN40, DN15-25)
• Choice of 4 different optimized capsule types - from 5 to max. 40 K subcooling
• High response sensitivity
• Exact control characteristic
• Robust and insensitive to water-hammer

Designs:
With flanges, Butt weld ends, Socket weld ends, Screwed sockets
With 2 up to 12 secondary connections (additional secondary connections on request)
Optional with insulation jacket
Optional with primary stop or control valve
Condensate collector optional with integral small bore dip pipe

Materials:
C22.8 (1.0460)
X6CrNiTi1810 (1.4541)
ASTM A105

Nominal diameter:
Primary connection top and bottom - DN 40 or DN 50
Secondary connection left and right - DN 15-25

Nominal pressure:
PN 40
Class 300

Medium:
Steam, Condensate, Process water, Hot oil

Temperature:
In dependence on material and pressure (see product catalogue)

Advantages:

• Applicable as steam distributor or condensate collector
• Robust compact modular structure with integral stop valve
• Body and integral stop valve bolted together without gasket, i.e. by metal-to-metal face joint
• Shock absorbed and noise reduced condensate return for vertical installation by integral small bore dip pipe