Knife Gate Valves

EX ET EB TL CR DT XC BC VG

 

WAFER STYLE KNIFE GATE VALVE

The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
Pulp and Paper
Power plants
Wastewater treatment plants
Chemical plants
Food and Beverage
Bulk handling
Mining
etc.
Sizes:
 
DN 50 to DN 1200 (larger diameters on request)
Working pressure:
 
DN 50 to DN 250:
DN 300 to DN 400:
DN 450:
DN 500 to DN 600:
DN 700 to DN 1200:
10 (kg/cm2)
6 (kg/cm2)
5 (kg/cm2)
4 (kg/cm2)
2 (kg/cm2)
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150)
Note:
other flange connections are available on request such as:
DIN PN 6 DIN PN 16 DIN PN 25
BS "D" and "E"ANSI 125
 
HEAVY DUTY KNIFE GATE VALVE
 
The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.
The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
Pulp and Paper
Power plants
Mining
Chemical plants
Wastewater
Food and Beverage
etc.
Sizes:
DN 50 to DN 600 (larger diameters on request)
Working pressure:
DN 50 to DN 600: 10 bar
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150)


 
BI-DIRECTIONAL KNIFE GATE VALVE
 
The EB model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries such as:
Wastewater treatment plants
Chemical plants
Food and Beverage
etc.
Sizes:
DN 50 to DN 1200 (larger diameters on request)
Working pressure:
DN 50 to DN 250:
DN 300 to DN 400:
DN 450:
DN 500 to DN 600:
DN 700 to DN 1200:
10 (kg/cm2)
6 (kg/cm
2)
5 (kg/cm
2)
4 (kg/cm
2)
2 (kg/cm
2)
Standard flange connection:
DIN PN 10
Face to face dimensions acc. to K1 DIN 3202 up to DN 300.


THROUGH CONDUIT KNIFE GATE VALVE

The TL model knife gate is a through conduit wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries such as:
Pulp & Paper
Wastewater Treatment Plants
Power Plants
Chemical plants
etc.
Sizes:
DN 50 to DN 600 (larger diameters on request)
Working pressure:
DN 50 to DN 250:
DN 300 to DN 400:
DN 450:
DN 500 to DN 600:
10 (kg/cm2)
6 (kg/cm2)
5 (kg/cm2)
4 (kg/cm2)
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150)
Note:
other flange connections are available on request such as:
DIN PN 6 PN 16 PN 25
BS "D" and "E" ANSI 125

 

 

ROUND BY SQUARE PORT KNIFE GATE VALVE

The CR model knife gate is a heavy duty valve designed for handling difficult applications. This valve is suitable for use in recycle applications, like junk or sand traps of pulpers, high consistency cleaners,... or as silo outlet with solid material.
The two piece body with round inlet and square outlet (larger than the inlet) assures non-jamming.
Sizes:
DN 100 to DN 600 (larger diameters on request)
Working pressure:
DN 100 to DN 600: 10 (kg/cm2)
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150) /on valve inlet only

 

DOUBLE GATE KNIFE GATE VALVE

The DT model knife gate is double gate valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or contaminated media. In open position, both gates retract into the body and allow full flow. When closing, the gates push stock and contaminants as staples, wires,... out of the body into the flow.
Stroke time is the half of conventional valves.
All components subject to wear are replaceable.
Sizes:
DN 100 to DN 600 (larger diameters on request)
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150)
Working pressure:
DN 100 to DN 250:
DN 300 to DN 400:
DN 450:
DN 500 to DN 600:
10 (kg/cm2)
6 (kg/cm2)
5 (kg/cm2)
4 (kg/cm2)


HOPPER SHAPE KNIFE GATE VALVE

The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the body allows for easy passage of the fluid and makes it ideal for use as silo outlet valve. Widely used in industries such as:
Power plants
Food and Beverage
Chemical plants
Mining
etc.
The valve is normally installed in the reverse position (seat upstream) in order to avoid problems like build-up in valve body, seat wear, difficult closing,...
Sizes:
DN 50 to DN 600 (larger diameters on request)
Working pressure:

DN 50 to 250:
DN 300 to 400:
DN 450:
DN 500 to 600:

10 (kg/cm2)
6 (kg/cm2)
5 (kg/cm2)
4 (kg/cm2)
seat opposite pressure:
3 (kg/cm
2)
2 (kg/cm2)
1,5 (kg/cm2)
1 (kg/cm2)
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150)
Note: other flange connections are available on request.


SQUARE PORT KNIFE GATE VALVE

The BC model knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as:
Chemical plants
Wastewater treatment Plants
Power plants
Mining
Food and Beverage
etc.
Sizes:
DN 200 x 200 to DN 600 x 600 (other dimensions on request)
Working pressure:
200 x 200:
250 x 250:
300 x 300:
350 x 350:
400 x 400:
450 x 450:
500 x 500:
600 x 600:
2,5 (kg/cm2)
2 (kg/cm
2)
2 (kg/cm
2)
1,5 (kg/cm
2)
1,5 (kg/cm
2)
1,25 (kg/cm
2)
1 (kg/cm
2)
1 (kg/cm
2)

RUBBER SLEEVE KNIFE GATE VALVE

The VG model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve body and the two rubber sleeves makes the VG valve suited for use in handling abrasive slurries in industries such as:
Mining
Power plants
Chemical plants
Wastewater treatment
etc.
Sizes :
DN 50 to DN 600 (larger DN on request)
Working pressure :
DN 50 to 125:
DN 150:
DN 200 to 250:
DN 300:
DN 350 to 400:
DN 450 to 600:
9 (kg/cm2)
6 (kg/cm
2)
5 (kg/cm
2)
4 (kg/cm
2)
3 (kg/cm
2)
2,5 (kg/cm
2)
Note: Availability for gate manufacturing in other materials to achieve higher working pressures. Please consult our technical department.
Standard Flange connection:
DIN PN 10 and ANSI B16.5 (class 150)
Standard face to face dimensions according to MSS SP-81